Видео

Looks like you have that Franklin Armory binary action going on. Lol.

Good morning, I’m putting together a couple of kits I’ve purchased years ago. I have a a couple of complete uppers that don’t have the keyed end to accept a standard 5.56 BCD, would you think these are 9mm. I had knew I had a couple of kits, just wanted to clear this up.

THANK YOU!! I've had this Jump starter for about a year and I used it twice within the first month that I had it. Then, it was TODAY that I found the jump starter failed to start a friends vehicle. In fact, the light wouldn't come on and realized that the battery in the unit was dead. I've even read the entire manual before I tried it (just as I had EVERY TIME Before I went to use it), I must agree with you! The manual is abysmal! As a User Guide Technical writer myself, I found the TackLife T8 manual to be incredibly confusing. It included a lot of unimportant info about uses that were obvious, even to a child. But I noticed immediately that there were important instructions and references left out! The manufacturer simply doesn't understand how important a correctly written manual is to their sales. This seems to be a fact for many of the China-made devices and they seem unaware of how it can effect their US sales! I have NO DOUBT whatsoever that this manual caused TacKLife's product to receive poor reviews and ultimately lost a lot of money in US Sales. I was about to look into how to open this unit so I could possibly replace the battery when I happened on to your video. As I write this comment, I have the Model T8 on the charger, (with the ON/OFF switch set to "ON"), and I'll test the 5V and 12V Outputs with a DVMM in about 2 hours. If I don't see at least a 50% charge on this unit by then, I'll probably look at replacing the battery. The manufacturer has 2 Power On/Off options, which confuses the way to operate this thing (thanks to their 'manual'). I think they could've left out one of those Power options and made it easier to function if they applied a little thought. However, I'm sure that there's at least one or more large capacitors inside that carry a 15V wallop when the "Boost" button is pushed. So, maybe the reason for the 2 power buttons may have something to do with a safety application. Then again, I think I remembered that the ON/OFF Switch doesn't need to be switched On when jumpstarting the vehicle. They should've focused more on the unit's Jump-starting features and left out the USB charging options for cellphones and whatnot. That, and a professionally written user manual by experienced writers, (which, IMO, is the number one thing they needed the most). Thanks again for the video! I should know in a few hours whether or not this jump starter has a bad battery. Rich

Picatinny is not the name of a rail. Tue rail is called the M1913 rail system. Picatinny is the name of the place where it was made.

Got all of them right except Hoppe's. That one threw me.

I always cringe when people hold an AKM and call it an AK47. It's not a pronunciation thing, but still.

I bought this rail a few years ago, I wish I had gone with mlok or keymod because I can’t add anything to this rail, like a for grip or flash light and laser. Anyone know where to get the parts to do that, please let me know.

Indoor steel ban, as was explained to me by two local ranges, is due to the steel core sparking off of the steel backstop and causing an occasional fire.

Mine has red light on

I have a cmmg 9 mm upper. Will any 9 mm lower work, specifically the foxtrot 9 mm lower. Thanks.

Thanks very good explanation.

It’s money…. The ranges can’t pick it up and resell the brass

I don't suppose you've taken one appart? The part that plugs in with the cables doesn't seem to work, lights don't come on or bleep. The main body holds charge, lights come on and sems fine.

Thanks, the advice on the safety is mucho appreciato

Does it work for heat?

Saw the unknown hinson in the back and I knew I found a new channel to subscribe to.

Seems like a good way to turn away lots of customers

My problem is when I receive mines in the mail I charge it up to 100% and put it up until I need it when I got ready to use it one day for the first time the box came on flashlight works etc but once I connect the cable to it nothing happens it doesn’t jump the car off no green light indicator on the side to let you know it’s good to go or anything any suggestions or solutions

When the video opened with Jethro Tull I hit subscribe. Good info, thanks

Instant help. Thanks bro!

I bought one in different brand cvlife an I got it on my ar pistol case of having to have your eye so close to it works perfectly

For those who don’t want to wait, the pronunciation is at approximately 1:20. It’s pronounced like Poppies (the flower) but with an “h” at the front.

I too have never been a seal. This video has held up well.

Have the P01 Omega and went with the brown/black g 10 grips from Lok Grips in the thin profile and man did they make all the difference the sandpaper texture is very grippy. I just bought a nice PCR that I intend to make my everyday carry. The gun came with very nice wood “Palm Swell” grips that are a little big for my hand but that didn’t make any difference in my decision to buy it because I knew that Lok had me covered with whatever I needed. I ordered a nice set of carbon fiber “thin”grips with blood red liners! lok grips are the best aftermarket option for your CZ pistols!

And the 938 is done too! Thank you!

Thank you, the best demo of all on RUclips, got the 238 done no problem, on to the 938!

So there worried about sparks when a 3in flame comes out the end of the barrel..

I agree with a lot of comments on here. I hate the way that the Russian influenced media has decided to divide us with cookie cutter labels.. They try to stereotype: North= No guns South= Gun lovers Yadda yadda... Right wing as gun owners and everyone else hates guns. It's such bullshit. My father raised me and my brothers with rifles and handguns. We were taught about responsible use and respect for their power. He gave the talk at the same time he discussed driving a car. He would say these both are weapons, guns and vehicles. I still practice at NRA range when I can.

I work at an indoor range in Texas that allows aluminum but not steel case. Until I worked there, I too thought it was only because of sweeping up the brass. However, in the last two years we've had three fires on the lanes. I've had to put them out, so no, it's not BS

According to who? You cite no authoritative source, such as, for example, the people who started the company.

No steel cased ammo due to it's a pain to separate from brass when collecting it.

Thanks for the video! I just handled one of these that belongs to a lady friend. I was surprised how hard the take-down pin was to remove since the pin doesn't protrude like those on my 1911's do. This and the ejector issue on reassembly seem to be design flaws. Now I am cognizant of these issues, I can take it down and show her how it's done.

I wish I had watched this review before buying :)

Gracias

What I dislike is the proprietary charger. My other units use a USB C or other common charger.

The reason is because of a fire risk. The steeel case ammo can start a fire with the unspent gunpowder and debris in the trap and can actually start a internal fire inside the rubber debris backstop that may not be known about or seen for a significant amount of time. While i believe the fire risk is somewhat low or lets say not high the risk is fhere and could be deviststing.

have my first cz on order.. can't wait... yes its a p-01.. saw this review ...got on the site... tx and shipping and guide rod about $16.00.... good review... and thanks for the tip with the rubber mallet...

You wonder why b&d doesnt. Listen to its costomers...their. line feed system is crap

Very informative! Since I have only glocks, I want to purchase a 1911 with double action options and good to know about what the decocker does and how to use it.

.. I've been doing it that way for years..Great video! If you can't tie a knot try these suggestions: I have a Black Decker electric trimmer. crimp a plastic connector to hold the string. Yellow or blue.. use long string wrapped around the post . Drill a second hole across from the original and fix the string to exit both holes. Now you have a two string trimmer..

They sell the brass that's it

I’ve been looking into the CZ 75 for a while and was wondering what the hell decocking actually means, and this perfectly answered my question! Thank you very much!

Thank you

I will let you know once its completely charged.

Omg thank you sooooo much, I am so glad I didn't throw my unit away.

'your safety detent/plunger will fly out from the frame and it's not something you can fix yourself.' "You also cannot screw in a light bulb yourself, and you'll have to call the utility company if you remove a bulb from a lamp."

Beautiful 🎉🎉❤

Short side was up I thought

I think the obvious conclusion here is that more than 50% of the posts state that their starter won’t charge regardless of on/ off switch or anything else we’ve tried. The company has bad ratings on BBB. Amazon dropped them. Do we need more clues?

I think the obvious conclusion here is that more than 50% of the posts state that their starter won’t charge regardless of on/ off switch or anything else we’ve tried. The company has bad ratings on BBB. Amazon dropped them. Do we need more clues?